Do you need Hydrostatic Drain Testing for your plumbing drains in Burleson Texas? With cracks in your foundation, Sheetrock, bricks or floors it could be time for Hydrostatic Drain Testing for plumbing leaks. The Hydrostatic Drain test involves plugging off the drain system where it comes out from under the building. Then we fill the pipes with water to check for leaks usually to the level of a shower or commode flange. If the water falls from this level that is an indication there are leaks under the slab.
When we do a hydrostatic drain test we need a proper clean-out. The test balls need to be upstream where we can see if the test ball is holding the water in the drain system and not leaking. We need either a two way clean-out tee or two combination tees turned towards each other.
Hydrostatic Drain Testing and Isolation
If a leak is discovered in the drainage system after the hydrostatic test is complete then isolating the leak is the next step. This step requires place test balls in the drainage system at different points to isolate each section to find the area that is leaking. Once we find the leaking area we isolate sections to try and pin-point the leak. A video camera and hydraulic test hose is necessary to locate the test at the proper points for the testing.
Contact our Burleson Plumbing Company Slab Leak Detection and Repair
Our Burleson Plumbing Company has several ways for you to contact us. We have live chat on our web sites listed above and also in the right column of this page, or you can call us at 817-447-2654 Monday thru Friday. Some weekends we are available.
If you have questions or need additional help, please don’t hesitate to give us a call. Our Burleson plumbers are experienced in all types of plumbing repairs.